Knowledge
Using the most modern equipment, we slit bands from brass, copper, phosphor bronze, nickel silver, steel, stainless steel, and aluminium. We also have the ability to work with lacquered or refined materials, and if desired, we can cut your material with a minimal-grease process.
Also, depending upon the raw material, we can provide this service well below the tolerances allowed according to the DIN regulations.
Matieral thickness: | from 0,10 mm to 2,00 mm |
Matieral width | from 3 mm to 650 mm |
Coil-Outer: | to 1.500 mm. |
Coil weight: | from 4,00 kg pro mm band width |
Coil-Inner: | 76, 150 / 300 / 400 / 500 mm also on paperboard cores |
Sheet metal cutting: | up to 3000 mm Width up, bis 5,5 mm thick |
Foils and paper-interlayers – Edge treatment – Band cuts |